Diatone Tyrant 180 5.8g 40ch Naze32- rev6 FPV Racing Drone PnF/ARF

I just ordered a Diatone Tyrant 180 FPV racing drone.

I got the PnF model, that comes with Naze32 FC. I plan to install a FrSky X4R-SB Receiver, and use my existing FrSky Taranis Transmitter.

 Diatone Tyrant 180 (PNF) Notable Features (what caught my attention):

• Simple & sturdy 4mm/3k Carbon-fiber composite frame & PDB
• Naze32 Flight Controller (Rev6 6DoF 32bit processor)
• Runs CleanFlight
• ESCs 20amp OneShot-125 opto (serviceable & replaceable)
• Motors BX2204-2300kv brushless & 4-inch props
• Landing-gear/ motor-protectors

Requires:

• Requires any good (hobby grade) 2.4ghz RC-Radio for control
• Requires 3s-1200mah LiPo battery (or similar) with XT60

Then just pick your goggles or FPV-screen. With EV-800, that's a nice pre-assembled entry-level  racing-drone FPV quadcopter ... for around $350 usd.

UPDATE: It's now built and flies good ... complete PnF Build and maiden flight.

Also, here is my partially de-pinned X4R-SB install.